Wood Veneer is produced by slicing a log in thin layers with a blade. In contrast to solid wood, which is sawn, veneer makes optimal use of the log without any sawing loss.

Cutting a log can be done in various ways. Each way produces a different pattern, and can be cut to various thicknesses. The standard thickness is 0.6 mm. Most frequently used wood types are also available as a thick veneer.

Veneer retains the natural look and feel of real wood as well as its unique properties, showing authentic colour and pattern variations. To highlight the natural characteristics, we can further process and finish the veneer wood to the client’s personal taste. Veneer lives, gaining in expression throughout the years. This allows this genuine natural product to discern itself from imitations.

Wood Veneer Applications

Wood veneer is mainly used for interior decoration applications in many different segments. It’s ideal for residential projects, hotel projects, offices and many more. In addition, veneer is also processed to create a variety of products such as veneer parquet, flexible veneer sheets, wood veneer boards, wood veneer wallpaper, etc. In other words, veneer can give any interior a unique look and feel

Each Veneer is Unique

Every tree is different so every veneer product has a unique appearance. The same tree can never be found twice in nature. This also means that the colour and pattern can vary within the same wood species. After all, veneer is real wood and not an imitation like laminate or melamine. The latter are both imitations of wood on paper.

The colour of wood veneer is also influenced by light in the room and this can give the wood an even warmer feel. The numerous imitations of different wood types have made it difficult for the consumer to distinguish the real natural product from the imitations.

The wood structure which is unique for every piece of wood veneer, the colour which continues to enhance the appearance, the ability to repair and renovate are just some of the advantages that distinguish the real thing from the would-be products.

Slicing and Jointing Techniques

The appearance of the veneer sheet is determined by the way we slice the wood and join the pieces together. The 3 most frequently used slicing methods are:

Crown Cut

Flame pattern by cutting through the heart of the log.

Crown Cut Wood Veneer
Crown Cut Wood Veneer

Quarter Regular Cut

Straight-grained, cut at right angles to the growth rings.

Quarter Regular Cut Wood Veneer
Quarter Regular Cut Wood Veneer

Quarter Rift Cut

Straight-grained pattern by rotating the tree around its axis, cutting perpendicular to the growth rings under a certain angle.

Quarter Rift Cut Wood Veneer
Quarter Rift Cut Wood Veneer

Jointing Techniques

Using advanced technology, we are able to join the sliced wood into a veneer sheet. The images below show the different techniques that we apply. This allows you to decide on the final look and feel of your panel. You can make the optimal choice for your application. Whatever you choose: real wood is always unique and gives your project that extra character.

Book matched

This is the standard jointing method. The sliced strips of veneer wood are jointed mirrored, two by two. This technique clearly shows the pattern variations of the tree in the jointed sheet.

Example:
Wood species: American Walnut
Slicing technique: CROWN CUT
Jointing technique: BOOK MATCHED

Slip matched

The veneer strips are matched one after the other and then jointed. This is the recommended jointing technique if the veneer should be stained. As all strips have the same side up, there is no colour difference between the strips

Example:
Wood species: American Walnut
Slicing technique: CROWN CUT
Jointing technique: SLIP MATCHED

Reverse slip matched

The veneer is more evenly spread throughout the veneer sheet due to the head-to-head combination.

Example:
Wood species: American Walnut
Slicing technique: CROWN CUT
Jointing technique: REVERSE SLIP MATCHED

Crown Cut Book Matched Veneer
Crown Cut Slip Matched Veneer
Crown Cut Reverse Slip Matched Veneer

Mix-matched

Mix-matched is literally what it says: mixing and matching. The veneer strips are jointed randomly with variations in colour and structure, creating an interesting yet cohesive effect. Mix-matched is the veneer alternative for the plank effect of solid wood. It is possible to create a mix of both crown cut and quarter cut, or use crown cut only or quarter cut only.

Quarter Cut Mix-matched Veneer

Example:
Wood species: American Walnut
Slicing technique: QUARTER CUT
Jointing technique: MIX-MATCHED

Crown Cut Mix-matched Veneer

Example:
Wood species: American Walnut
Slicing technique: CROWN CUT
Jointing technique: MIX-MATCHED

Quarter and Crown Cut Mix-matched Veneer

Example:
Wood species: American Walnut
Slicing technique: QUARTER & CROWN CUT
Jointing technique: MIX-MATCHED

X