Solvent-free, acrylic based primer with aggregates providing excellent bonding characteristics. Okatmos® UG 30 will bond and adhere to absorbent and non-absorbent substrates before interior levelling work or tile and natural stone installations. Okatmos® UG 30 can also be applied over properly prepared cut-back adhesives, old or badly sanded asphalt floors, terrazzo, tile, particle board, chipboard, OSB, cement backer units, concrete screeds and well bonded ceramic tiles.
When used over existing exterior tiles, a waterproofing membrane Servoflex DMS 1K Plus SuperTec is required. Metal and similar substrates must be rust-free and cleaned with acetone. Odourless and environmentally friendly. As part of the Okatmos®-product-line, Okatmos® UG 30 avoids the development of odours and stenches originating in microbial interactions in the floor-structure. It is therefore very suitable for renovation purposes.
SKU
VSA0216
Product Type
Acrylic based primer
Pack Size
10kg
Length
Width
Thickness
Surface Area
Coverage Rate
Approx. 80m2
Warranty
10 Years
Acoustic Ratings
Working Time
Colour
Blue
Application
Interior, exterior walls and floors
Application Temperature
+5 °C to +30 °C (substrate)
Drying Time*
Approx. 0.5 - 5 hours (over cementitious substrate). Over calcium sulfate floors and wooden structure at least 24 hours.
Suitable with Underfloor Heating
Yes
GISCODE
D 1 acc. to TRGS 610
EMICODE
EC 1Plus (GEV)
Storage
Store in frost protected area for up to 12 months (keep from freezing)
Walkable*/ready for grouting*
Compressive Strength
* At 68 °F (+20 °C) and 65 % relative humidity. Higher temperature and low humidity decreases, lower temperature and high humidity increases this value respectively.
